For homeowners
For households who want their system looked after properly, without getting on the roof.
- Single and double-storey homes
- Pitched, tiled and metal roofs
- Cleaning combined with bird proofing
Core service
Professional cleaning for residential and commercial solar systems, removing dust, droppings, pollen and grime with methods chosen to suit your panels.
Why it matters
Solar panels work best when sunlight reaches the cells without obstruction. Over time, rooftop systems collect dust, bird droppings, pollen, leaf litter and environmental grime.
A light layer of dust may have only a small effect, but heavier or patchy soiling, especially bird droppings and edge build-up, can reduce how much light gets through. Left long enough, some deposits become harder to remove.
Regular, careful cleaning helps keep your system performing as intended and gives you a chance to spot visible issues early. It also saves you from climbing onto the roof yourself, something we strongly recommend homeowners avoid.
Common problems
Every site is different. These are the issues we're most often asked to deal with.
Fine dust from roads, construction, farms and industry settles on panels and bonds with moisture into a film.
Droppings are dense, sticky and don't wash off in rain. Even small patches can shade parts of a panel.
On lower-tilt panels, dirty water collects along the bottom frame and dries into a line of grime.
Nearby trees can drop pollen, sap and leaves that collect across and between panels.
Steep, high or fragile roofs make DIY cleaning risky. Working at height needs the right equipment and approach.
The wrong chemicals, tools or water pressure can harm panels or affect warranties. Method matters.
Our approach
We don't apply one technique to every roof. Each job starts with understanding the panels, the roof and the site.
Benefits
Practical benefits without inflated promises.
More light reaching the cells, helping your system perform as designed.
Gentle methods that respect panel surfaces, seals and frames.
A professional set of eyes on your array during each visit.
Avoid the hazards of climbing onto your roof with a hose and broom.
Applications
The same careful standard, scaled to the size and complexity of your site.
For households who want their system looked after properly, without getting on the roof.
For facility managers and owners responsible for larger arrays and busy sites.
Process
Straightforward from enquiry to completion.
Share your address, roof type, approximate panel count and a few photos if you can.
We'll confirm what's involved, the method we recommend and the price.
On the day, we assess the site, clean using the agreed method and keep the area tidy.
We let you know the job's complete and mention anything we noticed along the way.
FAQ
There's no single rule. It depends on your environment (nearby trees, dust from roads, farms or industry, coastal salt, bird activity) and on how steeply your panels are tilted. Many owners book a clean when they notice visible build-up or a drop in their system's output. We can suggest a sensible interval once we understand your site.
Removing dirt and droppings lets more light reach the cells, and many owners see an improvement after a clean. How much depends on how dirty the panels were and on your system, weather and shading, so we don't promise a specific figure. Your inverter or monitoring app is the best way to compare before and after.
No, not as a default. High pressure can damage panel seals, frames and coatings, and many manufacturers advise against it. We use gentle methods suited to your panels, and we follow the manufacturer's cleaning guidance wherever it's available.
Rain helps, but it rarely removes everything. Bird droppings, pollen and grime often stick, and on low-tilt panels dirty water tends to collect along the bottom edge of the frame, leaving a line of build-up over time.
Not always. If we have safe access to the roof and know any site requirements, we can usually complete the work without you there. We'll confirm the arrangements when we book.
Yes. We work with warehouses, commercial rooftops and larger installations, and can plan cleaning around your operations, site access and safety requirements.
Quotes are based on the number of panels, roof height and pitch, access, and the condition of the panels. Send us a few details (photos help) and we'll provide a clear, itemised quote.
Yes, and it's often the sensible order: we clean the panels and remove any nesting debris, then install the protective mesh.
Tell us about your system and we'll come back with a clear quote.