Residential
For homeowners dealing with pigeons or other birds under their panels, or who want to prevent the problem before it starts.
Request a home quoteProtection
Protective mesh and humane exclusion systems that stop birds nesting beneath your panels and keep debris, droppings and damage away from your array.
The problem
The gap between rooftop panels and the roof is sheltered, shaded and hard for predators to reach, which makes it an ideal spot for birds such as pigeons to roost and nest.
Once established, birds tend to return to the same site. Nesting material, droppings and debris build up under the array and across the panels, and the activity can be noisy and persistent.
Bird proofing closes off that space with a protective barrier around the perimeter of the array, so birds can no longer get underneath.
Common problems
Signs you may need bird proofing.
Sticks, feathers and nesting material accumulate under the panels and around roof fixtures.
Droppings build up on the glass and roof, obstructing light and staining surfaces.
Birds and nesting activity can disturb or damage exposed cabling and components beneath the array.
Debris washes into gutters and downpipes, where it can cause blockages.
Scratching and calling from under the panels, often early in the morning.
Birds come back to established sites. Cleaning alone rarely solves the problem.
Our solution
Protective mesh is fitted around the perimeter of the array, closing the gap between the panels and the roof.
Benefits
Birds can no longer get underneath the array.
Reduces droppings and debris on your panels, roof and gutters.
Keeps nesting activity away from cabling and equipment.
A low-profile barrier that suits the look of the system.
Applications
For homeowners dealing with pigeons or other birds under their panels, or who want to prevent the problem before it starts.
Request a home quoteFor businesses and property managers with larger arrays, where bird activity can affect maintenance, cleanliness and site presentation.
Request a commercial quoteProcess
Photos of the array and any nesting help us quote accurately.
We'll recommend the right approach and confirm the price.
We clear the debris, clean the area and fit the mesh around the array.
FAQ
The mesh is typically held in place with clips designed to attach to solar panel frames, so there is no need to drill into the panels or the roof. We confirm the right fixing method for your system before we start.
Non-penetrative clip systems are designed to avoid altering the panels themselves. Warranty terms vary between manufacturers, so if you're unsure, check with your installer or manufacturer. We're happy to share details of the system we'd use.
Yes. The aim is exclusion: stopping birds getting under the panels, not harming them. We check for active nests before installation, and native birds are protected in NSW. If we find an active nest of a protected species, we'll pause and advise on the appropriate next step.
That's the most common situation. We remove existing nesting material and debris (subject to the check above), clean the area, then install the mesh to stop birds returning.
The mesh sits around the edges of the array, below the panels. It is usually low-profile and chosen in a finish that blends with the system.
Yes. Cleaning and bird proofing in one visit is efficient: we remove the debris, clean the panels and then fit the protection.
Durability depends on the materials, your environment and exposure. We use materials designed for outdoor, rooftop conditions and can discuss options when quoting.
Send us a few photos and we'll recommend the right solution.